BAOLAIHUA

 PRECISIONMANUFACTURING

 

GET A QUOTE
★ ISO 9001:2015★ IATF 16949★ ISO 13485★ AS9100 Rev D
Get a Quote
  2. Home
  3. >
  4. Injection Molding
  5. >
  6. Two-Shot & Double-Color Molding
  7. >
  8. Pad print

Related Products

  • Product
  • Product Overview
  • Specifications
  • Related Custom Services
Pad print

Pad print

finished in-house with adhesion, salt spray and colour control reported per batch.

Pad print

Select the number of specifications

Please check the product information you want!

Product Overview Specifications Related Custom Services

Product Overview

We finish pad printing and screen printing on curved and flat surfaces in our own coating line, so the part is moulded, decorated and inspected without leaving the factory. That matters because most coating defects are caused by the moulded surface underneath, and controlling both is the only way to keep the finish consistent.

What the finish has to survive

  • Adhesion: cross-hatch and tape test per the agreed specification
  • Salt spray and humidity exposure for exterior and under-hood parts
  • UV ageing and colour fastness for parts in daylight
  • Abrasion and hand-cream resistance for parts that are handled daily

Process

  • Moulded surface inspected and any witness marks polished out first
  • Flame or solvent pre-treatment where adhesion requires it
  • Base coat, effect coat and clear coat applied and cured
  • Colour checked against the master panel under a controlled light source

Decoration

  • Single and multi-colour pad printing, including curved surfaces
  • Screen printing for logos, scales and graphics
  • Laser engraving for part numbers and 2D codes
  • In-mold labelling where the graphic must survive heavy handling

Material is selected to your drawing. The grades listed are the ones we run most often for this type of part; we confirm the choice at DFM rather than assuming it.

Specifications

ParameterValue
Processsingle and multi-colour pad printing
SubstrateABS, PC, PC/ABS, PMMA, PA and plated plastics
AdhesionCross-hatch and tape test; result reported per batch
Salt sprayNeutral salt spray testing available on request
Colour controlPantone and customer master panel, checked under controlled light
Lead time3–7 working days after the moulded parts are available
Batch sizeFrom 1 piece for colour matching; production priced per volume
InspectionColour, gloss and adhesion report with each shipment

Related Custom Services

  • Injection molding of the part being finished
  • High-gloss and mirror cavity work in S136 for plating-grade surfaces
  • Texture and grain work for soft-touch and matte finishes
  • Assembly and packing into finished goods

No comment

Product Overview

Product Overview

We finish pad printing and screen printing on curved and flat surfaces in our own coating line, so the part is moulded, decorated and inspected without leaving the factory. That matters because most coating defects are caused by the moulded surface underneath, and controlling both is the only way to keep the finish consistent.

What the finish has to survive

  • Adhesion: cross-hatch and tape test per the agreed specification
  • Salt spray and humidity exposure for exterior and under-hood parts
  • UV ageing and colour fastness for parts in daylight
  • Abrasion and hand-cream resistance for parts that are handled daily

Process

  • Moulded surface inspected and any witness marks polished out first
  • Flame or solvent pre-treatment where adhesion requires it
  • Base coat, effect coat and clear coat applied and cured
  • Colour checked against the master panel under a controlled light source

Decoration

  • Single and multi-colour pad printing, including curved surfaces
  • Screen printing for logos, scales and graphics
  • Laser engraving for part numbers and 2D codes
  • In-mold labelling where the graphic must survive heavy handling

Material is selected to your drawing. The grades listed are the ones we run most often for this type of part; we confirm the choice at DFM rather than assuming it.

Specifications

Specifications

ParameterValue
Processsingle and multi-colour pad printing
SubstrateABS, PC, PC/ABS, PMMA, PA and plated plastics
AdhesionCross-hatch and tape test; result reported per batch
Salt sprayNeutral salt spray testing available on request
Colour controlPantone and customer master panel, checked under controlled light
Lead time3–7 working days after the moulded parts are available
Batch sizeFrom 1 piece for colour matching; production priced per volume
InspectionColour, gloss and adhesion report with each shipment
Related Custom Services

Related Custom Services

  • Injection molding of the part being finished
  • High-gloss and mirror cavity work in S136 for plating-grade surfaces
  • Texture and grain work for soft-touch and matte finishes
  • Assembly and packing into finished goods
Pad print
finished in-house with adhesion, salt spray and colour control reported per batch.
Long press to look detail
Copy product links
Long by picture save/share
INQUIRY
Онлайн-запрос MORE+

  • Name *

  • Work email *

  • Company *

  • Requirement *

  • Submit

    • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content：

You have no items to require

Add Successfully
No data
Service Center
Hi, how can I help you?Baolaihua
Hi, how can I help you?Customer service staff
Contacts
TEL
+86 15915357170
Working Hours
MONDAY-FRIDAY
Qrcode
Qrcode
We chat
Qrcode
Whats App
Service Center
Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.