BAOLAIHUA

 PRECISIONMANUFACTURING

 

GET A QUOTE
★ ISO 9001:2015★ IATF 16949★ ISO 13485★ AS9100 Rev D
Get a Quote
  2. Home
  3. >
  4. 3D Printing
  5. >
  6. Humanoid Robot Full-body Build

Related Products

  • Product
  • Product Overview
  • Specifications
  • Related Custom Services
Humanoid Robot Full-body Build

Humanoid Robot Full-body Build

supported across the whole development cycle, from printed samples in days to production tooling once the geometry is frozen.

Humanoid Robot Full-body Build

Select the number of specifications

Please check the product information you want!

Product Overview Specifications Related Custom Services

Product Overview

We support robotic arm parts, dexterous hand grippers and humanoid assemblies across the whole development cycle: printed and machined samples while the mechanism is still moving, then production tooling once the geometry is frozen. Robotics programmes iterate fast, so the tooling has to be able to follow.

Robot parts are usually lightweight, often overmoulded for grip, and almost always needed in small batches first. That combination is exactly what our additive, machining and molding capabilities side by side are for.

What we make

  • Robotic arm links, end effectors and gripper fingers
  • Dexterous hand assemblies with overmoulded soft-touch pads
  • Humanoid robot structural shells and covers
  • Sensor housings, mounts and cable management parts

Development route

  • Printed or machined samples in days to prove fit and function
  • Bridge production in the production resin while the tool is cut
  • Production tool in NAK80 or S136 once the design is frozen
  • Overmolding of TPE grip pads and sealing lips where the part is handled

Material is selected to your drawing. The grades listed are the ones we run most often for this type of part; we confirm the choice at DFM rather than assuming it.

Specifications

ParameterValue
ApplicationRobotic arm parts, grippers, end effectors and humanoid assemblies
MaterialSelected to your drawing. We run PA12, PA66, PA66+GF30, PC, PC/ABS, POM, PEEK, TPE and TPU for this kind of part and confirm the grade with you at DFM.
Prototype routeSLS, SLA and DMLS metal printing, 2–10 working days
Production routeInjection molding in NAK80 or S136 tooling, 1 to 16 cavities
Tolerance±0.05 mm moulded, ±0.005 mm on machined datums
OvermoldingTPE and TPU grip pads on 320T and 800T rotary tables
Batch size1 piece for samples; volume production once the design is frozen
Tool life200,000–500,000 shots on pre-hardened steel, 500,000–1,000,000 shots on hardened inserts
CertificationISO 9001:2015, IATF 16949:2016, ISO 13485:2016, AS9100 Rev D

Related Custom Services

  • 3D printing for fast iteration during development
  • CNC machining of datums, joints and tight-tolerance features
  • Overmolding of soft-touch grips and sealing lips
  • Assembly of the finished gripper or hand sub-assembly

No comment

Product Overview

Product Overview

We support robotic arm parts, dexterous hand grippers and humanoid assemblies across the whole development cycle: printed and machined samples while the mechanism is still moving, then production tooling once the geometry is frozen. Robotics programmes iterate fast, so the tooling has to be able to follow.

Robot parts are usually lightweight, often overmoulded for grip, and almost always needed in small batches first. That combination is exactly what our additive, machining and molding capabilities side by side are for.

What we make

  • Robotic arm links, end effectors and gripper fingers
  • Dexterous hand assemblies with overmoulded soft-touch pads
  • Humanoid robot structural shells and covers
  • Sensor housings, mounts and cable management parts

Development route

  • Printed or machined samples in days to prove fit and function
  • Bridge production in the production resin while the tool is cut
  • Production tool in NAK80 or S136 once the design is frozen
  • Overmolding of TPE grip pads and sealing lips where the part is handled

Material is selected to your drawing. The grades listed are the ones we run most often for this type of part; we confirm the choice at DFM rather than assuming it.

Specifications

Specifications

ParameterValue
ApplicationRobotic arm parts, grippers, end effectors and humanoid assemblies
MaterialSelected to your drawing. We run PA12, PA66, PA66+GF30, PC, PC/ABS, POM, PEEK, TPE and TPU for this kind of part and confirm the grade with you at DFM.
Prototype routeSLS, SLA and DMLS metal printing, 2–10 working days
Production routeInjection molding in NAK80 or S136 tooling, 1 to 16 cavities
Tolerance±0.05 mm moulded, ±0.005 mm on machined datums
OvermoldingTPE and TPU grip pads on 320T and 800T rotary tables
Batch size1 piece for samples; volume production once the design is frozen
Tool life200,000–500,000 shots on pre-hardened steel, 500,000–1,000,000 shots on hardened inserts
CertificationISO 9001:2015, IATF 16949:2016, ISO 13485:2016, AS9100 Rev D
Related Custom Services

Related Custom Services

  • 3D printing for fast iteration during development
  • CNC machining of datums, joints and tight-tolerance features
  • Overmolding of soft-touch grips and sealing lips
  • Assembly of the finished gripper or hand sub-assembly
Humanoid Robot Full-body Build
supported across the whole development cycle, from printed samples in days to production tooling once the geometry is frozen.
Long press to look detail
Copy product links
Long by picture save/share
INQUIRY
Онлайн-запрос MORE+

  • Name *

  • Work email *

  • Company *

  • Requirement *

  • Submit

    • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content：

You have no items to require

Add Successfully
No data
Service Center
Hi, how can I help you?Baolaihua
Hi, how can I help you?Customer service staff
Contacts
TEL
+86 15915357170
Working Hours
MONDAY-FRIDAY
Qrcode
Qrcode
We chat
Qrcode
Whats App
Service Center
Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.