BAOLAIHUA

 PRECISIONMANUFACTURING

 

GET A QUOTE
★ ISO 9001:2015★ IATF 16949★ ISO 13485★ AS9100 Rev D
Get a Quote
  2. Home
  3. >
  4. CNC Machining
  5. >
  6. CNC Machined Anodized Aluminum Part

Related Products

  • Product
  • Product Overview
  • Specifications
  • Related Custom Services
CNC Machined Anodized Aluminum Part

CNC Machined Anodized Aluminum Part

machined in-house on 3, 4 and 5-axis centres with EDM and wire cutting, ±0.005 mm tolerance and no minimum order quantity.

CNC Machined Anodized Aluminum Part

Select the number of specifications

Please check the product information you want!

Product Overview Specifications Related Custom Services

Product Overview

We machine anodised aluminium and machined metal parts on our own three, four and five-axis centres and wire-cut and EDM equipment, so a part can be cut, finished and inspected in one workshop. Because there is no tooling, CNC is the right route for prototypes, for tight-tolerance features that a moulded part cannot hold, and for metal components.

Where a part will later move to injection molding, we can machine a sample from the same material to prove the geometry and the fit before any steel is cut.

Capabilities

  • 3-axis, 4-axis and 5-axis simultaneous machining
  • Wire cutting and EDM for internal corners and hardened features
  • Turning for nozzles, shafts, knurled knobs and threaded parts
  • Aluminium, stainless steel, brass, POM, PC, PA, PMMA and PEEK

Why it suits prototypes and low volume

  • No tooling cost, so one piece costs the same per part as ten
  • Tolerances of ±0.005 mm on machined datums
  • No draft angle or wall-thickness constraint, unlike molding
  • Fast changeover when the drawing is still moving

Material is selected to your drawing. The grades listed are the ones we run most often for this type of part; we confirm the choice at DFM rather than assuming it.

Specifications

ParameterValue
ProcessCNC machining with anodising and surface treatment
Axes3-axis, 4-axis and 5-axis simultaneous; wire cut and EDM in-house
MaterialSelected to your drawing. We run Aluminium, stainless steel, brass, POM, PC, PA, PMMA, PEEK for this kind of part and confirm the grade with you at DFM.
Tolerance±0.005 mm on machined features; ±0.05 mm general
Surface finishRa 1.6 µm standard, Ra 0.8 µm achievable; anodising and passivation available
Lead time3–7 working days for most parts
Batch size1 piece upwards, no MOQ
InspectionCMM Global S at 1.5 µm accuracy, full 3D report on request

Related Custom Services

  • Injection molding for volume production once the design is frozen
  • Sheet metal fabrication and stamping for flat and formed parts
  • Surface finishing: anodising, chrome plating, painting and laser engraving
  • Mold flow analysis and DFM before a production tool is quoted

No comment

Product Overview

Product Overview

We machine anodised aluminium and machined metal parts on our own three, four and five-axis centres and wire-cut and EDM equipment, so a part can be cut, finished and inspected in one workshop. Because there is no tooling, CNC is the right route for prototypes, for tight-tolerance features that a moulded part cannot hold, and for metal components.

Where a part will later move to injection molding, we can machine a sample from the same material to prove the geometry and the fit before any steel is cut.

Capabilities

  • 3-axis, 4-axis and 5-axis simultaneous machining
  • Wire cutting and EDM for internal corners and hardened features
  • Turning for nozzles, shafts, knurled knobs and threaded parts
  • Aluminium, stainless steel, brass, POM, PC, PA, PMMA and PEEK

Why it suits prototypes and low volume

  • No tooling cost, so one piece costs the same per part as ten
  • Tolerances of ±0.005 mm on machined datums
  • No draft angle or wall-thickness constraint, unlike molding
  • Fast changeover when the drawing is still moving

Material is selected to your drawing. The grades listed are the ones we run most often for this type of part; we confirm the choice at DFM rather than assuming it.

Specifications

Specifications

ParameterValue
ProcessCNC machining with anodising and surface treatment
Axes3-axis, 4-axis and 5-axis simultaneous; wire cut and EDM in-house
MaterialSelected to your drawing. We run Aluminium, stainless steel, brass, POM, PC, PA, PMMA, PEEK for this kind of part and confirm the grade with you at DFM.
Tolerance±0.005 mm on machined features; ±0.05 mm general
Surface finishRa 1.6 µm standard, Ra 0.8 µm achievable; anodising and passivation available
Lead time3–7 working days for most parts
Batch size1 piece upwards, no MOQ
InspectionCMM Global S at 1.5 µm accuracy, full 3D report on request
Related Custom Services

Related Custom Services

  • Injection molding for volume production once the design is frozen
  • Sheet metal fabrication and stamping for flat and formed parts
  • Surface finishing: anodising, chrome plating, painting and laser engraving
  • Mold flow analysis and DFM before a production tool is quoted
CNC Machined Anodized Aluminum Part
machined in-house on 3, 4 and 5-axis centres with EDM and wire cutting, ±0.005 mm tolerance and no minimum order quantity.
Long press to look detail
Copy product links
Long by picture save/share
INQUIRY
Онлайн-запрос MORE+

  • Name *

  • Work email *

  • Company *

  • Requirement *

  • Submit

    • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content：

You have no items to require

Add Successfully
No data
Service Center
Hi, how can I help you?Baolaihua
Hi, how can I help you?Customer service staff
Contacts
TEL
+86 15915357170
Working Hours
MONDAY-FRIDAY
Qrcode
Qrcode
We chat
Qrcode
Whats App
Service Center
Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.