BAOLAIHUA

 PRECISIONMANUFACTURING

 

GET A QUOTE
★ ISO 9001:2015★ IATF 16949★ ISO 13485★ AS9100 Rev D
Get a Quote
  2. Home
  3. >
  4. 3D Printing
  5. >
  6. 3D printer parts

Related Products

  • Product
  • Product Overview
  • Specifications
  • Related Custom Services
3D printer parts

3D printer parts

produced additively with no tooling and no minimum order quantity, for design verification, bridge production and geometries that cannot be machined.

3D printer parts

Select the number of specifications

Please check the product information you want!

Product Overview Specifications Related Custom Services

Product Overview

These parts are produced additively, so there is no tooling to pay for and no minimum order quantity. That makes this route the right one when you need a functional sample in days, a bridge batch while the production tool is cut, or a geometry that would be expensive to machine conventionally.

We run SLS nylon and SLA resin additive manufacturing. Because the part is built layer by layer, internal features, conformal cooling channels and organic shapes that a cutter cannot reach are straightforward to produce.

Materials

  • SLS nylon PA12 and PA12-GF, plus SLA resin
  • SLA resin for visual and master patterns
  • TPU and rubber-like flexible parts on request

When to choose additive

  • Design verification and functional testing before committing to a production tool
  • Bridge production of 1 to 500 pieces while the hard tool is in cut
  • Conformal cooling channels and geometries that cannot be machined
  • One-off and low-volume spares where tooling cost cannot be justified

Process

  • File review, build orientation and support strategy agreed before printing
  • Printed, cleaned and post-cured or sintered
  • Support removal, bead blasting and dyeing or metallising as required
  • Dimensional check on the CMM or profile projector before dispatch

Material is selected to your drawing. The grades listed are the ones we run most often for this type of part; we confirm the choice at DFM rather than assuming it.

Specifications

ParameterValue
ProcessSLS nylon and SLA resin additive manufacturing
MaterialSelected to your drawing. We run SLS nylon PA12 and PA12-GF, plus SLA resin for this kind of part and confirm the grade with you at DFM.
Layer thickness0.05–0.15 mm typical, set by process and finish
Tolerance±0.1 mm standard; ±0.05 mm achievable on machined datums
Minimum wall0.8–1.5 mm depending on process and material
Surface finishAs-printed, bead blasted, vapour smoothed, dyed or plated
Lead time2–5 working days for most parts; metal parts 5–10 days
Batch size1 piece upwards, no MOQ
InspectionCMM and profile projector dimensional report on request

Related Custom Services

  • Injection molding once the design is frozen and volume justifies a steel tool
  • CNC machining for datums, threads and tight-tolerance features
  • Vacuum casting for 10–100 pieces in production-grade resin
  • Surface finishing: chrome plating, painting, pad printing and laser engraving

No comment

Product Overview

Product Overview

These parts are produced additively, so there is no tooling to pay for and no minimum order quantity. That makes this route the right one when you need a functional sample in days, a bridge batch while the production tool is cut, or a geometry that would be expensive to machine conventionally.

We run SLS nylon and SLA resin additive manufacturing. Because the part is built layer by layer, internal features, conformal cooling channels and organic shapes that a cutter cannot reach are straightforward to produce.

Materials

  • SLS nylon PA12 and PA12-GF, plus SLA resin
  • SLA resin for visual and master patterns
  • TPU and rubber-like flexible parts on request

When to choose additive

  • Design verification and functional testing before committing to a production tool
  • Bridge production of 1 to 500 pieces while the hard tool is in cut
  • Conformal cooling channels and geometries that cannot be machined
  • One-off and low-volume spares where tooling cost cannot be justified

Process

  • File review, build orientation and support strategy agreed before printing
  • Printed, cleaned and post-cured or sintered
  • Support removal, bead blasting and dyeing or metallising as required
  • Dimensional check on the CMM or profile projector before dispatch

Material is selected to your drawing. The grades listed are the ones we run most often for this type of part; we confirm the choice at DFM rather than assuming it.

Specifications

Specifications

ParameterValue
ProcessSLS nylon and SLA resin additive manufacturing
MaterialSelected to your drawing. We run SLS nylon PA12 and PA12-GF, plus SLA resin for this kind of part and confirm the grade with you at DFM.
Layer thickness0.05–0.15 mm typical, set by process and finish
Tolerance±0.1 mm standard; ±0.05 mm achievable on machined datums
Minimum wall0.8–1.5 mm depending on process and material
Surface finishAs-printed, bead blasted, vapour smoothed, dyed or plated
Lead time2–5 working days for most parts; metal parts 5–10 days
Batch size1 piece upwards, no MOQ
InspectionCMM and profile projector dimensional report on request
Related Custom Services

Related Custom Services

  • Injection molding once the design is frozen and volume justifies a steel tool
  • CNC machining for datums, threads and tight-tolerance features
  • Vacuum casting for 10–100 pieces in production-grade resin
  • Surface finishing: chrome plating, painting, pad printing and laser engraving
3D printer parts
produced additively with no tooling and no minimum order quantity, for design verification, bridge production and geometries that cannot be machined.
Long press to look detail
Copy product links
Long by picture save/share
INQUIRY
Онлайн-запрос MORE+

  • Name *

  • Work email *

  • Company *

  • Requirement *

  • Submit

    • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content：

You have no items to require

Add Successfully
No data
Service Center
Hi, how can I help you?Baolaihua
Hi, how can I help you?Customer service staff
Contacts
TEL
+86 15915357170
Working Hours
MONDAY-FRIDAY
Qrcode
Qrcode
We chat
Qrcode
Whats App
Service Center
Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.